3Com S7902E Command Reference Manual - page 1720
4-2
Parameters
table-name
: Name of the WRED table to be displayed.
Description
Use the
display qos wred table
command to display the WRED table configuration information.
If no WRED table name is specified, the configuration of all the WRED tables is displayed.
Related commands:
queue
.
Examples
# Display the configuration of WRED table queue-table1.
Table Name: queue-table1
Table Type: Queue based WRED
QID: gmin gmax gprob ymin ymax yprob rmin rmax rprob
-----------------------------------------------------------------------
0 10 NA 10 10 NA 10 10 NA 10
1 10 NA 10 10 NA 10 10 NA 10
2 10 NA 10 10 NA 10 10 NA 10
3 10 NA 10 10 NA 10 10 NA 10
4 10 NA 10 10 NA 10 10 NA 10
5 10 NA 10 10 NA 10 10 NA 10
6 10 NA 10 10 NA 10 10 NA 10
7 10 NA 10 10 NA 10 10 NA 10
Table 4-1 display qos wred table
command output description
Field
Description
Table name
Name of a WRED table
Table type
Type of a WRED table
Queue ID
ID of the queue
gmin
Lower threshold configured for green packets, whose drop precedence is 0
gmax
Upper threshold configured for green packets, whose drop precedence is 0
gprob
Drop probability slope configured for green packets, whose drop precedence is 0
ymin
Lower threshold configured for yellow packets, whose drop precedence is 1
ymax
Upper threshold configured for yellow packets, whose drop precedence is 1
yprob
Drop probability slope configured for yellow packets, whose drop precedence is 1
rmin
Lower threshold configured for red packets, whose drop precedence is 2
rmax
Upper threshold configured for red packets, whose drop precedence is 2
rprob
Drop probability slope configured for red packets, whose drop precedence is 2