3Com S7902E Command Reference Manual - page 678
1-9
11.0.0.0/8 Static 60 0 0.0.0.0 NULL0
11.1.0.0/16 Static 60 0 0.0.0.0 NULL0
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
# Display route entries by specifying a destination IP address and mask and the
longer-match
keyword.
Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
For detailed description of the above output, see
Table 1-1
.
# Display route entries for destination addresses in the range 1.1.1.0 to 5.5.5.0.
Routing Table : Public
Destination/Mask Proto Pre Cost NextHop Interface
1.1.1.0/24 Direct 0 0 1.1.1.1 Vlan1
1.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0
2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2
2.2.2.1/32 Direct 0 0 127.0.0.1 InLoop0
3.3.3.0/24 Direct 0 0 3.3.3.1 Vlan3
3.3.3.1/32 Direct 0 0 127.0.0.1 InLoop0
4.4.4.0/24 Direct 0 0 4.4.4.1 Vlan4
4.4.4.1/32 Direct 0 0 127.0.0.1 InLoop0
display ip routing-table ip-prefix
Syntax
display ip routing-table ip-prefix
ip-prefix-name
[
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
ip-prefix-name
: IP prefix list name, a string of 1 to 19 characters.
verbose
: Displays detailed routing table information, including that for inactive routes. With this
argument absent, the command displays only brief information about active routes.
Description
Use the
display ip routing-table ip-prefix
command to display information about routes permitted by a
specified prefix list.