3Com S7902E Command Reference Manual - page 1764
1-23
Related commands:
local-user
.
Examples
# Set the level of user
user1
to 3.
[Sysname] local-user user1
[Sysname-luser-user1] level 3
local-user
Syntax
local-user user-name
undo local-user
{
user-name
|
all
[
service-type
{
ftp
|
lan-access
|
ssh
|
telnet
|
terminal
} ] }
View
System view
Default Level
3: Manage level
Parameters
user-name
: Name for the local user, a case-sensitive string of 1 to 55 characters that does not contain
the domain name. It cannot contain any backward slash (\), forward slash (/), vertical line (|), colon (:),
asterisk (*), question mark (?), less-than sign () and the @ sign and cannot be a,
al, or all.
all
: Specifies all users.
service-type
: Specifies the users of a type.
z
ftp
refers to users using FTP;
z
lan-access
refers to users accessing the network through an Ethernet, such as 802.1X users;
z
ssh
refers to users using SSH;
z
telnet
refers to users using Telnet;
z
terminal
refers to users logging in through the console port, AUX port.
Description
Use the
local-user
command to add a local user and enter local user view.
Use the
undo local-user
command to remove the specified local users.
By default, no local user is configured.
Related commands:
display local-user
,
service-type
.
Examples
# Add a local user named
user1
.
[Sysname] local-user user1
[Sysname-luser-user1]