3Com S7902E Command Reference Manual - page 759
1-27
Default Level
1: Monitor level
Parameters
process-id
: OSPF process ID, in the range 1 to 65535.
interface-type interface-number
: Interface type and interface number.
neighbor-id
: Neighbor’s router ID.
Description
Use the
display ospf retrans-queue
command to display retransmission queue information.
If no OSPF process is specified, the retransmission queue information of all OSPF processes is
displayed.
Examples
# Display OSPF retransmission queue information.
OSPF Process 1 with Router ID 1.1.1.1
OSPF Retransmit List
The Router's Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Retransmit list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 2.2.2.2 80000004 1
Network 12.18.0.1 2.2.2.2
80000003 1
Sum-Net 12.18.1.0 2.2.2.2
80000002 2
Table 1-14 display ospf retrans-queue
command output description
Field
Description
The Router's Neighbor is Router ID
Neighbor router ID
Address
Neighbor interface IP address
Interface
Interface address of the router
Area Area
ID
Retrans List
Retransmission list
Type
LSA type
LinkState ID
Link state ID
AdvRouter Advertising
router
Sequence
LSA sequence number
Age LSA
age