3Com S7902E Command Reference Manual - page 680
1-11
View
Any view
Default Level
1: Monitor level
Parameters
protocol
: Routing protocol. It can be
bgp
,
direct
,
isis
,
ospf
,
rip
,
static
, or
guard
.
inactive
: Displays information about only inactive routes. With this argument absent, the command
displays information about both active and inactive routes.
verbose
: Displays detailed routing table information. With this argument absent, the command displays
brief routing table information.
Description
Use the
display ip routing-table
protocol
command to
display routing information of a specified
routing protocol.
Examples
# Display brief information about direct routes.
Public Routing Table : Direct
Summary Count : 4
Direct Routing table Status :
Summary Count : 4
Destination/Mask Proto Pre Cost NextHop Interface
2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2
2.2.2.2/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
Direct Routing table Status :
Summary Count : 0
# Display brief information about static routes.
Public Routing Table : Static
Summary Count : 1
Static Routing table Status :
Summary Count : 0
Static Routing table Status :
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface