3Com S7902E Command Reference Manual - page 926
1-62
Examples
# In BGP view, specify the interval for sending the same update to peer group
test
as 10 seconds.
[Sysname] bgp 100
[Sysname-bgp] peer test as-number 100
[Sysname-bgp] peer test route-update-interval 10
# In BGP-VPN instance view, specify the interval for sending the same update to peer group
test
as 10
seconds (the VPN has been created).
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test as-number 100
[Sysname-bgp-vpn1] peer test route-update-interval 10
peer substitute-as (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name
|
ip-address
}
substitute-as
undo peer
{
group-name
|
ip-address
}
substitute-as
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a sting of 1 to 47 characters.
ip-address
: IP address of a peer.
Description
Use the
peer substitute-as
command to replace the AS number of a peer/peer group in the AS_PATH
attribute with the local AS number.
Use the
undo peer substitute-as
command to remove the configuration.
No AS number is replaced by default.
Examples
# In BGP view, substitute local AS number for AS number of peer 1.1.1.1.
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 substitute-as
# In BGP-VPN instance view, substitute local AS number for AS number of peer 1.1.1.1 (the VPN has
been created).
[Sysname] bgp 100