3Com S7902E Command Reference Manual - page 2183
1-10
Parameters
None
Description
Use the
enable log updown
command to allow a port to generate link up/down logging information
when the port state changes.
Use the
undo enable log updown
command to disable a port from generating link up/down logging
information when the port state changes.
By default, all the ports are allowed to generate port link up/down logging information when the port
state changes.
Examples
# Disable port Ethernet 2/0/1 from generating link up/down logging information.
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] undo enable log updown
info-center channel name
Syntax
info-center channel
channel-number name channel-name
undo info-center channel channel-number
View
System view
Default Level
2: System level
Parameters
channel
-
number
: Specifies a channel number, in the range 0 to 9.
channel-name
: Specifies a channel name, a string of 1 to 30 characters. It must be a combination of
letters and numbers, and start with a letter and is case insensitive.
Description
Use the
info-center channel
name
command to name a channel with a specified channel number.
Use the
undo info-center channel
command to restore the default name for a channel with a specified
channel number.
Refer to
Table 1-1
for details of default channel names and channel numbers.
Examples
# Name channel 0 as
abc
.
[Sysname] info-center channel 0 name abc