3Com S7902E Command Reference Manual - page 109
1-26
Examples
# Create a manual port group named
group1
.
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1]
reset counters interface
Syntax
reset counters interface
[
interface-type
[
interface-number
] ]
View
User view
Default Level
2: System level
Parameters
interface-type
: Interface type.
interface-number
: Interface number.
Description
Use the
reset counters interface
command to clear the statistics of an interface.
Before sampling network traffic within a specific period of time on an interface, you need to clear the
existing statistics.
z
If neither interface type nor interface number is specified, this command clears the statistics of all
the interfaces.
z
If only the interface type is specified, this command clears the statistics of the interfaces that are of
the interface type specified.
z
If both the interface type and interface number are specified, this command clears the statistics of
the specified interface.
Examples
# Clear the statistics of Ethernet 2/0/1.
shutdown
Syntax
shutdown
undo shutdown
View
Ethernet interface view