3Com S7902E Command Reference Manual - page 274
1-7
display oam critical-event
Syntax
display oam critical-event
[
interface interface-type interface-number
]
View
Any view
Default Level
2: System level
Parameters
interface
interface-type interface-number
: Specifies a port by its type and number.
Description
Use the
display oam critical-event
command to display the statistics on critical Ethernet OAM link
events occurred on a port.
If you do not specify the
interface
keyword, this command displays the statistics on the critical Ethernet
OAM link events occurred on all the ports of the switch.
Examples
# Display the statistics on critical Ethernet OAM link events occurred on all the ports.
Port : GigabitEthernet2/0/1
Link Status : Up
Event statistic :
-------------------------------------------------------------------------
Link Fault :0 Dying Gasp : 0 Critical Event : 0
Table 1-6 display oam critical-event
command output description
Field
Description
Port Port
index
Link Status
Link status
Event statistic
Statistics on critical Ethernet OAM link events
Link Fault
Indicates whether Ethernet OAM link error
events occurred. Refer to
Table 1-2
for more.
Dying Gasp
Indicates whether Dying Gasp events occurred.
Refer to
Table 1-2
for more.
Critical Event
Indicates whether Critical events occurred. Refer
to
Table 1-2
for more.
display oam link-event
Syntax
display oam link-event
{
local
|
remote
}
[
interface interface-type interface-number
]