3Com S7902E Command Reference Manual - page 1999
1-8
z
isis: Displays the isis configuration.
z
isp: Displays the ISP configuration.
z
post-system: Displays the post-system configuration.
z
radius-template: Displays the Radius template configuration.
z
system: Displays the system configuration.
z
user-interface: Displays the user interface configuration.
interface
[
interface-type
] [
interface-number
]: Displays the interface configuration, where
interface-type
represents the interface type and
interface-number
represents the interface number.
by-linenum
: Specifies to display the number of each line.
|
: Specifies to use regular expression to filter the configuration of display device. For the detailed
description of the regular expression, refer to the
CLI Display
part of
Basic System Configuration
in the
System Volume
.
z
begin: Displays the line that matches the regular expression and all the subsequent lines.
z
exclude: Displays the lines that do not match the regular expression.
z
include: Displays only the lines that match the regular expression.
regular-expression
: Regular expression, a string of 1 to 256 characters. Note that this argument is
case-sensitive and can have spaces included.
Description
Use the
display current-configuration
command to display the current validated configuration of a
device.
You can use the
display current-configuration
command to view the currently validated configuration.
A parameter is not displayed if it has the default configuration. If the validated parameter is changed,
although you have configured it, the validated parameter is displayed. For example, ip address
11.11.11.11 24 has been configured on a Loopback interface. In this case, if you execute the
display
current-configuration
command, ip address 11.11.11.11 255.255.255.255 is displayed, meaning the
validated subnet mask is 32 bits.
Related commands:
save
,
reset saved-configuration
,
display saved-configuration
.
Examples
# Display the configuration of VLAN-interface 1 of the current device (the output information depends on
the device model and the current configuration).
#
interface Vlan-interface1
ip address 192.168.0.72 255.255.255.0
igmp group-policy 2000
igmp static-group 224.1.1.1 source 1.1.1.1
multicast boundary 224.5.5.0 24
multicast boundary 224.1.1.0 24
ntp-service multicast-server
ntp-service multicast-server 224.0.1.0
ntp-service multicast-server 224.0.1.2
#
return