3Com S7902E Command Reference Manual - page 1257
1-21
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 30.30.30.1 0 0 300i
Refer to
Table 1-8
for description on the fields above.
display bgp multicast routing-table community
Syntax
display bgp multicast routing-table community
[
aa:nn
]& [
no-advertise
|
no-export
|
no-export-subconfed
] * [
whole-match
]
View
Any view
Default Level
2: Monitor level
Parameters
aa:nn
: Community number. Both aa and nn are in the range 0 to 65535.
&: Argument before it can be entered up to 13 times.
no-advertise
: Displays MBGP routes that cannot be advertised to any peer.
no-export
: Displays MBGP routes that cannot be advertised out the AS. If a confederation is configured,
it displays routes that cannot be advertised out the confederation, but can be advertised to other sub
ASs in the confederation.
no-export-subconfed
: Displays MBGP routes that cannot be advertised out the AS or to other sub ASs
in the confederation.
whole-match
: Displays the MBGP routes exactly matching the specified community attributes.
Description
Use the
display bgp multicast routing-table community
command to display IPv4 MBGP routing
information with the specified BGP community attribute.
Examples
# Display IPv4 MBGP routing information with the specified BGP community attribute.
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 10.10.10.0/24 0.0.0.0 0 0 i