3Com S7902E Command Reference Manual - page 1543
1-11
regular-expression
: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the
display mpls ldp session
command to display information about LDP sessions.
If you do not specify any parameter, the command displays information about all public network LDP
sessions.
Related commands:
mpls ldp
(system view),
mpls ldp
(interface view).
Examples
# Display information about all public network LDP sessions.
LDP Session(s) in Public Network
Total number of sessions: 1
--------------------------------------------------------------------------
Peer-ID Status LAM SsnRole FT MD5 KA-Sent/Rcv
--------------------------------------------------------------------------
1.1.1.1:0 Operational DU Active Off Off 4582/4582
--------------------------------------------------------------------------
LAM : Label Advertisement Mode FT : Fault Tolerance
Table 1-4 display mpls ldp session
command output description
Field
Description
SsnRole
Role of the current LSR in the session, Active or Passive
KA-Sent/Rcv
Number of sent Keepalives and that of received Keepalives during the session
# Display detailed information about all public network LDP sessions.
LDP Session(s) in Public Network
--------------------------------------------------------------------------
Peer LDP ID : 1.1.1.1:0 Local LDP ID : 3.3.3.3:0
TCP Connection : 3.3.3.3 -> 1.1.1.1
Session State : Operational Session Role : Active
Session FT Flag : Off MD5 Flag : Off
Reconnect Timer : --- Recovery Timer : ---
Negotiated Keepalive Timer : 45 Sec
Keepalive Message Sent/Rcvd : 6/6 (Message Count)
Label Advertisement Mode : Downstream Unsolicited
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism : Extended
Session existed time : 000:00:01 (DDD:HH:MM)
LDP Extended Discovery Source : Remote peer: 1
Addresses received from peer: (Count: 2)
10.1.1.1 1.1.1.1