3Com S7902E Command Reference Manual - page 1267
1-31
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] import-route rip
ipv4-family multicast
Syntax
ipv4-family
multicast
undo ipv4-family
multicast
View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the
ipv4-family multicast
command to enter IPv4 MBGP address family view.
Use the
undo ipv4-family multicast
command to remove all the settings made in IPv4 MBGP address
family view.
Examples
# Enter IPv4 MBGP address family view.
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul]
network (MBGP family view)
Syntax
network
ip-address
[
mask
|
mask-length
] [
short-cut
|
route-policy
route-policy-name
]
undonetwork ip-address
[
mask | mask-length
] [
short-cut
]
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
ip-address
: Destination IP address.
mask
: Mask of the network address, in dotted decimal notation.
mask-length
: Mask length, in the range 0 to 32.