3Com S7902E Command Reference Manual - page 672
1-3
State: Active Adv Age: 00h00m30s
Tag: 0
Destination: 10.1.1.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h00m30s
Tag: 0
Destination: 127.0.0.0/8
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h00m36s
Tag: 0
Destination: 127.0.0.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h00m36s
Tag: 0
Displayed first are statistics for the whole routing table, followed by detailed description of each route (in
sequence).
Table 1-2
display ip routing-table verbose command output description
Field
Description
Destination Destination address/mask length
Protocol
Protocol that presents the route
Process ID
Process ID
Preference
Priority of the route
Cost
Cost of the route
NextHop
Address of the next hop on the route
Interface
Outbound interface for packets to be forwarded along the route
RelyNextHop
The next hop address obtained through routing recursion
Neighbour
Neighboring address determined by Routing Protocol
Tunnel ID
Tunnel ID