3Com S7902E Command Reference Manual - page 243
1-2
Number of GVRP Frames Received : 0
Number of GVRP Frames Transmitted : 0
Number of Frames Discarded : 0
display garp timer
Syntax
display
garp timer
[
interface interface-list
]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-list
: Defines one or multiple Ethernet ports. You can provide up to 10 Ethernet port
lists, by each of which you can specify an individual port in the form of
interface-type interface-number
,
or a port range in the form of
interface-type interface-number1
to
interface-type interface-number2
,
where the end-port number specified by
interface-number2
must be greater than the start-port number
specified by
interface-number1
. If no ports are specified, this command displays the GARP timer
settings on all ports.
Description
Use the
display
garp timer
command to display GARP timer settings of specific ports.
Note that:
z
If the
interface interface-list
keyword-argument combination is not specified, this command
displays the GARP timer settings of all the ports.
z
If the
interface interface-list
keyword-argument combination is specified, this command displays
the GARP timer settings of the specified ports.
Related commands:
garp timer
,
garp timer leaveall
.
Examples
# Display GARP timers on port GigabitEthernet 2/0/1.
GARP timers on port GigabitEthernet2/0/1
Garp Join Time : 20 centiseconds
Garp Leave Time : 60 centiseconds
Garp LeaveAll Time : 1000 centiseconds
Garp Hold Time : 10 centiseconds
garp timer
Syntax
garp timer
{
hold
|
join
|
leave
}
timer-value