3Com S7902E Command Reference Manual - page 221
1-29
display ip-subnet-vlan vlan
Syntax
display ip-subnet-vlan vlan
{
vlan
-
id
[
to vlan
-
id
]
| all
}
View
Any view
Default Level
2: System level
Parameters
vlan
-
id
: VLAN ID, in the range 1 to 4094.
to
: Specifies a VLAN ID range. The argument after this keyword must be greater than or equal to the
one before this keyword.
all
: Specifies all the VLANs.
Description
Use the
display ip-subnet-vlan vlan
command to display the IP subnet information and IP subnet
indexes on the specified VLAN(s).
Related commands:
display vlan
.
Examples
# Display the IP subnet information of all VLANs.
VLAN ID: 3
Subnet Index IP Address Subnet Mask
====================================================
0 192.168.1.0 255.255.255.0
Table 1-7 display ip-subnet-vlan vlan
command output description
Field
Description
VLAN ID
VLAN ID
Subnet Index
IP subnet index
IP Address
IP address of the subnet (can be an IP address or a network address)
Subnet Mask
Mask of the IP subnet
ip-subnet-vlan
Syntax
ip-subnet-vlan
[
ip-subnet-index
]
ip ip-address
[
mask
]
undo ip-subnet-vlan
{
ip-subnet-index
[
to
ip-subnet-end
] |
all
}