3Com S7902E Command Reference Manual - page 277
1-10
oam enable
Syntax
oam enable
undo oam enable
View
Ethernet port view
Default Level
2: System level
Parameters
None
Description
Use the
oam enable
command to enable Ethernet OAM on an the Ethernet port.
Use the
undo oam enable
command to disable Ethernet OAM on the Ethernet port.
By default, Ethernet OAM is disabled on all Ethernet ports.
After you enable Ethernet OAM for an Ethernet port, the port attempts to establish an OAM connection
to the peer in the predetermined mode.
Related commands:
oam mode
.
Examples
# Enable OAM on GigabitEthernet 2/0/1.
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] oam enable
oam errored-frame period
Syntax
oam errored-frame period period-value
undo oam errored-frame period
View
System view
Default Level
2: System level
Parameters
period-value
: Errored frame detection interval, ranging from 1 to 60 (in seconds).
Description
Use the
oam errored-frame period
command to set the errored frame detection interval.