3Com S7902E Command Reference Manual - page 1516
1-12
Parameters
vpn-instance-name
: Name of the VPN instance, a string of 1 to 31 characters.
Description
Use the
display ip vpn-instance
command to display information about a VPN instance or all VPN
instances.
If you do not specify any parameter, the command displays brief information about all VPN instances.
Examples
# Display information about all VPN instances.
Total VPN-Instances configured : 2
VPN-Instance Name RD Create Time
vpn1 22:1 2003/10/13 09:32:45
vpn2 33:3 2003/10/13 09:42:59
Table 1-9
Description on the fields of the
display ip vpn-instance
command
Field
Description
VPN-Instance Name
Name of the VPN instance
RD
RD of the VPN instance
Create Time
Time when the VPN instance was created
# Display detailed information about a specified VPN instance.
VPN-Instance Name and ID : vpn1, 1
Create time : 2006/04/08 13:01:30
Up time : 0 days, 00 hours, 11 minutes and 42 seconds
Route Distinguisher : 22:1
Export VPN Targets : 3:3 5:5
Import VPN Targets : 4:4 5:5
Import Route Policy : poly-1
Description : This is vpn1
Maximum number of Routes : 500
Interfaces : Vlan-interface10
Table 1-10
Description on the fields of display ip vpn-instance instance-name
Field
Description
VPN-Instance Name and ID
Name and ID of the VPN instance
CreateTime
Time when the VPN instance was created
Up time
Duration of the VPN instance
Route Distinguisher
RD of the VPN instance
Export VPN Targets
Export target attribute of the VPN instance