3Com S7902E Command Reference Manual - page 1397
1-26
holdtime assert (IPv6 PIM view)
Syntax
holdtime assert
interval
undo holdtime assert
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval
: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use the
holdtime assert
command to configure the global value of the assert timeout time.
Use the
undo holdtime assert
command to restore the system default.
By default, the assert timeout time is 180 seconds.
Related commands:
holdtime join-prune
,
pim ipv6 holdtime join-prune
,
pim ipv6 holdtime assert
.
Examples
# Set the global value of the assert timeout time to 100 seconds.
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100
holdtime join-prune (IPv6 PIM view)
Syntax
holdtime join-prune
interval
undo holdtime join-prune
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval
: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the
holdtime join-prune
command to configure the global value of the join/prune timeout time.
Use the
undo holdtime join-prune
command to restore the system default.