3Com S7902E Command Reference Manual - page 2260
1-15
Default Level
2: System level
Parameters
get
: Obtains data from the HTTP server.
post
: Transfers data to the HTTP server.
Description
Use the
operation
command to configure the HTTP operation type.
Use the
undo operation
command to restore the default.
By default, the HTTP operation type is
get
.
Examples
# Configure the HTTP operation type as
post
.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation post
operation interface
Syntax
operation interface interface-type interface-number
undo
operation interface
View
DHCP test type view
Default Level
2: System level
Parameters
interface-type interface-number
: Type and number of the interface that is performing a DHCP test.
Description
Use the
operation interface
command to specify the interface to perform a DHCP test.
Use the
undo operation interface
command to restore the default.
By default, no interface is specified to perform a DHCP test.
Note that the specified interface must be up; otherwise, the test will fail.
Examples
# Specify the interface to perform a DHCP test as VLAN-interface 2.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp