3Com S7902E Command Reference Manual - page 340
2-2
dba-report queue-id threshold
Syntax
dba-report queue-id queue-id
{
active | inactive
}
threshold threshold-value
undo dba-report queue-id
View
ONU port view
Default Level
2: System level
Parameters
queue-id
: Queue number in the range 1 to 8.
threshold-value
: Threshold of a queue, in the range 0 to 65535. The default thresholds of queue 4 and
queue 5 are 65535, and the default thresholds of other queues are 0.
active
: Activates the threshold.
inactive
: Inactivates the threshold.
Description
Use the
dba-report queue-id threshold
command to configure the threshold for a queue.
Use the
undo dba-report queue-id
command to restore the default threshold for a queue.
Examples
# Configure the threshold of queue 1 as 200 and activate the threshold.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] dba-report queue-id 1 active threshold 200
dba-report queue-set-number
Syntax
dba-report queue-set-number queue-set-number
undo dba-report queue-set-number
View
ONU port view
Default Level
2: System level
Parameters
queue-set-number
: Number of queue sets. It is in the range 2 to 4 and defaults to 2.