3Com S7902E Command Reference Manual - page 144
1-2
Interface GigabitEthernet2/0/2
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-1100
Neighbor port index : 81
Neighbor state : two way
Neighbor aged time : 12
# Display the DLDP configuration of GigabitEthernet2/0/1.
Interface GigabitEthernet2/0/1
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-0100
Neighbor port index : 79
Neighbor state : two way
Neighbor aged time : 13
Table 1-1 display dldp
command output description
Field
Description
DLDP global status
Global DLDP state (
enable
or
disable
)
DLDP interval
Interval for sending Advertisement packets (in seconds)
DLDP work-mode
DLDP mode (
enhance
or
normal
)
DLDP authentication-mode
DLDP authentication mode (
none
,
simple
, or
md5
)
password
Password for DLDP authentication
DLDP unidirectional-shutdown
Port shutdown mode (
auto
or
manual
)
DLDP delaydown-timer
Setting of the DelayDown timer
The number of enabled ports
Number of the DLDP-enabled ports
Interface
Index of a DLDP-enabled port
DLDP port state
DLDP state on a port (
initial
,
inactive
,
active
,
advertisement
,
probe
,
disable
, or
delaydown
)
DLDP link state
Port state (
up
or
down
)
The neighbor number of the port
Number of the neighbors of a port
Neighbor mac address
MAC address of a neighbor
Neighbor port index
Neighbor port index
Neighbor state
Neighbor state (
unknown
,
one way
, or
two way
)
Neighbor aged time
Neighbor aging time