3Com S7902E Command Reference Manual - page 1215
1-3
Field
Description
Listen
Number of MSDP peers in the listen state
Connect
Number of MSDP peers in the connect state
Shutdown
Number of MSDP peers in the shutdown state
Down
Number of MSDP peers in the down state
Peer's Address
MSDP peer address
State
MSDP peer status:
z
Up: Session set up; MSDP peer in session
z
Listen: Session set up; local device as server,
in listening state
z
Connect: Session not set up; local device as
client, in connecting state
z
Shutdown: Deactivated
z
Down: Connection failed
Up/Down time
Length of time since MSDP peer connection was
established/failed
AS
Number of the AS where the MSDP peer is
located. “?” indicates that the system was unable
to obtain the AS number.
SA Count
Number of (S, G) entries
Reset Count
MSDP peer connection reset times
display msdp peer-status
Syntax
display msdp
[
all-instance
|
vpn-instance vpn-instance-name
]
peer-status
[
peer-address
]
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
peer-address
: Specifies an MSDP peer by its address. If you do not provide this argument, this
command will display the detailed status information of all MSDP peers.
Description
Use the
display msdp peer-status
command to view the detailed MSDP peer status information.
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.