3Com S7902E Command Reference Manual - page 1784
2-13
Default Level
3: Manage level
Parameters
radius-scheme-name
: RADIUS scheme name, a case-insensitive string of 1 to 32 characters.
Description
Use the
radius scheme
command to create a RADIUS scheme and enter RADIUS scheme view.
Use the
undo radius scheme
command to delete a RADIUS scheme.
By default, no RADIUS scheme is defined.
Note that:
z
The RADIUS protocol is configured scheme by scheme. Every RADIUS scheme must at least
specify the IP addresses and UDP ports of the RADIUS authentication/authorization/accounting
servers and the parameters necessary for a RADIUS client to interact with the servers.
z
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
z
You cannot remove the RADIUS scheme being used by online users with the
undo radius
scheme
command.
Related commands:
key
,
retry realtime-accounting
,
timer realtime-accounting
,
stop-accounting-buffer enable
,
retry stop-accounting
,
server-type
,
state
,
user-name-format
,
retry
,
display radius scheme
,
display radius statistics
.
Examples
# Create a RADIUS scheme named
radius1
and enter RADIUS scheme view.
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
radius trap
Syntax
radius trap
{
accounting-server-down
|
authentication-server-down
}
undo radius trap
{
accounting-server-down
|
authentication-server-down
}
View
System view
Default Level
2: System level
Parameters
accounting-server-down
: RADIUS trap for accounting servers.
authentication-server-down
: RADIUS trap for authentication servers.
Description
Use the
radius trap
command to enable the RADIUS trap function.