3Com S7902E Command Reference Manual - page 1228
1-16
peer sa-cache-maximum
Syntax
peer peer-address sa-cache-maximum
sa-limit
undo peer peer-address sa-cache-maximum
View
Public instance MSDP view, VPN instance MSDP view
Default Level
2: System level
Parameters
peer-address
: MSDP peer address.
sa-limit
: Maximum number of (S, G) entries that the device can cache, in the range of 1 to 8,192.
Description
Use the
peer sa-cache-maximum
command to configure the maximum number of (S, G) entries
learned from the specified MSDP peer that the device can cache.
Use the
undo
peer sa-cache-maximum
command to restore the system default.
By default, the device can cache a maximum of 8,192 (S, G) entries learned from any MSDP peer.
Related commands:
display msdp sa-count
,
display msdp peer-status
,
display msdp brief
.
Examples
# In the public instance allow the device to cache a maximum of 100 (S, G) entries learned from its
MSDP peer 125.10.7.6.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 sa-cache-maximum 100
peer sa-policy
Syntax
peer peer-address sa-policy
{
import
|
export
} [
acl
acl-number
]
undo peer peer-address sa-policy
{
import
|
export
}
View
Public instance MSDP view, VPN instance MSDP view
Default Level
2: System level
Parameters
import
: Specifies to filter SA messages from the specified MSDP peer.
export
: Specifies to filter SA messages forwarded to the specified MSDP peer.