3Com S7902E Command Reference Manual - page 1726
5-3
View
System view
Default Level
2: System Level
Parameters
dot1p-lp
: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp
: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp
: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p
: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp
: Specifies the DSCP-to-DSCP mapping table.
Description
Use the
qos map-table
command to enter specific priority mapping table view.
Related commands:
display qos map-table
.
Examples
# Enter 802.1p precedence-to-drop precedence mapping table view.
[Sysname] qos map-table dot1p-dp
[Sysname-maptbl-dot1p-dp]
Port Priority Configuration Commands
qos priority
Syntax
qos priority priority-value
undo qos priority
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
priority-value
: Port priority to be configured. This argument is in the range 0 to 7.
Description
Use the
qos priority
command to set the port priority for a port.
Use the
undo qos priority
command to restore the default port priority.
By default, the port priority is 0.