3Com S7902E Command Reference Manual - page 496
1-9
Parameters
None
Description
Use the
gratuitous-arp-sending enable
command to enable a device to send gratuitous ARP packets
when receiving ARP requests from another network segment.
Use the
undo gratuitous-arp-sending enable
command to restore the default.
By default, a device cannot send gratuitous ARP packets when receiving ARP requests from another
network segment.
Examples
# Disable a device from sending gratuitous ARP packets.
[Sysname] undo gratuitous-arp-sending enable
gratuitous-arp-learning enable
Syntax
gratuitous-arp-learning enable
undo gratuitous-arp-learning enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
gratuitous-arp-learning enable
command to enable the gratuitous ARP packet learning
function.
Use the
undo gratuitous-arp-learning enable
command to disable the function.
By default, the function is enabled.
Examples
# Enable the gratuitous ARP packet learning function.
[Sysname] gratuitous-arp-learning enable