3Com S7902E Command Reference Manual - page 1439
1-17
Field
Description
Origin attribute of the route:
i
Indicates the route is interior to the AS. Summary routes
and routes injected with the
network
command are
considered IGP routes.
e
Indicates that the route is learned from the Exterior
Gateway Protocol (EGP).
Ogn
?
It indicates that the origin of the route is unknown and the
route is learned by some other means. BGP sets the
Origin attribute of routes learned from other IGP
protocols to incomplete.
display bgp ipv6 multicast routing-table as-path-acl
Syntax
display bgp ipv6 multicast routing-table as-path-acl as-path-acl-number
View
Any view
Default Level
1: Monitor level
Parameters
as-path-acl-number
: Displays routing information matching an AS path ACL numbered 1 to 256
Description
Use the
display bgp ipv6 multicast routing-table as-path-acl
command to display the IPv6 MBGP
routes matching the specified AS path ACL.
Examples
# Display the IPv6 MBGP routes matching AS path ACL 20.
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Refer to
Table 1-7
for description on the fields above.