3Com S7902E Command Reference Manual - page 860
1-61
Examples
# Set the maximum LSP age to 1500 seconds.
[Sysname] isis
[Sysname-isis-1] timer lsp-max-age 1500
timer lsp-refresh
Syntax
timer lsp-refresh second
s
undo
timer lsp-refresh
View
IS-IS view
Default Level
2: System level
Parameters
second
s: LSP refresh interval in seconds, ranging from 1 to 65534.
Description
Use the
timer lsp-refresh
command to configure the LSP refresh interval.
Use the
undo timer lsp-refresh
to restore the default.
The default LSP refresh interval is 900 seconds.
Related commands:
timer lsp-max-age
.
To refresh LSPs before they are aged out, the interval configured by the
timer lsp-refresh
command
must be smaller than that configured by the
timer lsp-max-age
command.
Examples
# Configure the LSP refresh interval as 1500 seconds.
[Sysname] isis
[Sysname-isis-1] timer lsp-refresh 1500
timer spf
Syntax
timer spf maximum-interval
[
initial-interval
[
second-interval
] ]