3Com S7902E Command Reference Manual - page 1109
1-5
Value
Meaning
0x00100000
Indicates that an entry is successfully added
display multicast routing-table
Syntax
display multicast
[
all-instance
|
vpn-instance vpn-instance-name
]
routing-table
[
source-address
[
mask
{
mask
|
mask-length
} ] |
group-address
[
mask
{
mask
|
mask-length
} ] |
incoming-interface
{
interface-type interface-number
| register
} |
outgoing-interface
{ {
exclude
|
include
|
match
}
{
interface-type interface-number
|
register
} } ] *
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
source-address
: Multicast source address.
group-address
: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask
: Mask of the multicast group/source address, 255.255.255.255 by default.
mask-length
: Mask length of the multicast group/source address. For a multicast group address, this
argument has an effective value range of 4 to 32; for a multicast source address, this argument has an
effective value range of 0 to 32. The system default is 32 in both cases.
incoming-interface
: Displays multicast routing entries of which the incoming interface is the specified
one.
interface-type interface-number
: Specifies an interface by its type and number.
register
: Displays multicast routing entries of which the incoming interface is the specified register
interface of PIM-SM.
outgoing-interface
: Displays multicast routing entries of which the outgoing interface is the specified
one.
exclude
: Displays routing entries of which the outgoing interface list excludes the specified interface.
include
: Displays routing entries of which the outgoing interface list includes the specified interface.
match
: Displays routing entries of which the outgoing interface list includes only the specified interface.
Description
Use the
display multicast routing-table
command to view the multicast routing table information.
Note that: