3Com S7902E Command Reference Manual - page 1698
2-16
remark service-vlan-id
Syntax
remark service-vlan-id
vlan-id-value
undo remark service-vlan-id
View
Traffic behavior view
Default Level
2: System Level
Parameters
vlan-id-value
: VLAN ID to be set for packets, in the range of 1 to 4094.
Description
Use the
remark service-vlan-id
command to configure the action of setting the service provider
network VLAN ID for a traffic behavior.
Use the
undo remark service-vlan-id
command to remove the action of setting the service provider
network VLAN ID.
z
Note that: If the
remark service-vlan-id
action will be applied to the inbound direction of a port or
port group on an EA LPU, the classification rule must be configured with the
if-match
customer-vlan-id
command, and the other actions except
remark dot1p
cannot be configured in
the traffic behavior.
z
If the
remark service-vlan-id
action will be applied to the outbound direction of a port or port group
on an SC LPU, any other actions except
filer
and
remark dot1p
cannot be configured in the traffic
behavior.
z
The
remark service-vlan-id
action cannot be applied to a VLAN or applied globally.
Related commands:
qos policy
,
traffic behavior
,
classifier behavior
.
Examples
# Configure the action of setting the service provider network VLAN ID to 2 for a traffic behavior.
[Sysname] traffic behavior database
[Sysname-behavior-database] remark service-vlan-id 2
traffic behavior
Syntax
traffic behavior
behavior-name
undo traffic behavior
behavior-name
View
System view