3Com S7902E Command Reference Manual - page 1063
1-48
refresh bgp ipv6
Syntax
refresh
bgp
ipv6
{
ipv4-address
|
ipv6-address
|
all
|
external
|
group group-name
|
internal
} {
export
|
import
}
View
User view
Default Level
1: Monitor level
Parameters
ipv4-address
: Soft-resets the connection with an IPv4 BGP peer.
ipv6-address
: Soft-resets the connection with an IPv6 BGP peer.
all
: Soft-resets all IPv6 BGP connections.
external
: Soft-resets EBGP connections.
group ipv6-group-name
: Soft-resets connections with a peer group. The name of the peer group is a
string of 1 to 47 characters.
internal
: Soft-resets IBGP connections.
export
: Performs soft reset in outbound direction.
import
: Performs soft reset in inbound direction.
Description
Use the
refresh bgp
ipv6
command to soft reset specified IPv4/IPv6 BGP connections. With this
feature, you can refresh the IPv4/IPv6 BGP routing table and apply a new available policy without
tearing down BGP connections.
To perform IPv4/IPv6 BGP soft reset, all routers in the network should support route-refresh. If a router
not supporting route refresh exists in the network, you need to use the
peer keep-all-routes
command
on the local router to save all route updates before performing soft reset.
Examples
# Soft reset inbound IPv6 BGP connections.
reset bgp ipv6
Syntax
reset bgp ipv6
{
as-number
|
ipv4-address
|
ipv6-address
[
flap-info
] |
all
|
group group-name
|
external
|
internal
}
View
User view