3Com S7902E Command Reference Manual - page 2071
1-22
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
slave
auto-update
config
command to enable the configuration file auto-save function. After
the function is enabled, when you configure to save the current configuration on the AMB, the SMB
automatically saves the current configuration to its configuration file.
Use the
undo slave
auto-update
config
command to disable the function.
By default, the configuration file auto-save function is enabled.
Examples
# Enable the configuration file auto-save function.
[Sysname] slave auto-update config
startup saved-configuration
Syntax
startup
saved-configuration
cfgfile
undo startup saved-configuration
View
User view
Default Level
2: System level
Parameters
cfgfile
: Configuration file name.
Description
Use the
startup saved-configuration
command to specify a startup configuration file (the
configuration file to be used at the next system startup).
Use the
undo
startup saved-configuration
command to configure the system to start up with the null
configuration, that is, the factory configuration.
The specified file must be ended with a .cfg extension and saved in the root directory of the storage
device.
Related commands:
display startup
.