3Com S7902E Command Reference Manual - page 1902
1-15
Default Level
3: Manage level
Parameters
ipv6 ipv6-address
: Specifies a source IPv6 address.
interface interface-type interface-number
: Specifies a source interface by its type and number.
Description
Use the
sftp client ipv6 source
command to specify the source IPv6 address or source interface for an
SFTP client.
Use the
undo sftp client ipv6 source
command to remove the configuration.
By default, the client uses the interface address specified by the route of the device to access the SFTP
server.
Examples
# Specify the source IPv6 address of the SFTP client as 2:2::2:2.
[Sysname] sftp client ipv6 source ipv6 2:2::2:2
sftp client source
Syntax
sftp client source
{
ip
ip-address
|
interface interface-type interface-number
}
undo sftp client source
View
System view
Default Level
3: Manage level
Parameters
ip
ip-address
: Specifies a source IPv4 address.
interface interface-type interface-number
: Specifies a source interface by its type and number.
Description
Use the
sftp client source
command to specify the source IPv4 address or interface of an SFTP client.
Use the
undo sftp source-interface
command to remove the configuration.
By default, a client uses the IP address of the interface specified by the route to access the SFTP
server.
Related commands:
display sftp client source
.
Examples
# Specify the source IP address of the SFTP client as 192.168.0.1.