3Com S7902E Command Reference Manual - page 482
1-1
1
IP Addressing Configuration Commands
IP Addressing Configuration Commands
display ip interface
Syntax
display ip interface
[
interface-type interface-number
]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number
: Specifies an interface by its type and number.
Description
Use the
display ip interface
command to display information about a specified or all Layer 3
interfaces.
Examples
# Display information about interface VLAN-interface 1.
Vlan-interface1 current state : DOWN
Line protocol current state : DOWN
Internet Address is 1.1.1.1/8 Primary
Broadcast address : 1.255.255.255
The Maximum Transmit Unit : 1500 bytes
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
ARP packet input number: 0
Request packet: 0
Reply packet: 0
Unknown packet: 0
TTL invalid packet number: 0
ICMP packet input number: 0
Echo reply: 0
Unreachable: 0
Source quench: 0
Routing redirect: 0
Echo request: 0