3Com S7902E Command Reference Manual - page 601
1-1
1
UDP Helper Configuration Commands
UDP Helper Configuration Commands
display udp-helper server
Syntax
display udp-helper server
[
interface
interface-type interface-number
]
View
Any view
Default Level
2: System level
Parameters
interface
interface-type interface-number
: Displays information of forwarded UDP packets on the
specified interface.
Description
Use the
display udp-helper server
command to display the information of forwarded UDP packets on
the specified interface or all interfaces.
If
interface-type interface-number
is not specified, this command displays the information of forwarded
UDP packets on all interfaces.
Examples
# Display the information of forwarded UDP packets on the interface VLAN-interface 1.
Interface name
Server address
Packets sent
Vlan-interface1 192.1.1.2
0
The information above shows that the IP address of the destination server corresponding to the
interface VLAN-interface 1 is 192.1.1.2, and that no packets are forwarded to the destination server.
reset udp-helper packet
Syntax
reset udp-helper packet
View
User view