3Com S7902E Command Reference Manual - page 1752
1-11
Parameters
hwtacacs-scheme hwtacacs-scheme-name
: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
Description
Use the
authorization command
command to specify the authorization scheme for command line
users.
Use the
undo authorization command
command to restore the default.
By default, the default authorization scheme is used for command line users.
Note that the HWTACACS scheme specified for the current ISP domain must have been configured.
Related commands:
authorization default
,
hwtacacs scheme
.
Examples
# Configure the default ISP domain
system
to use HWTACACS authorization scheme
hw
for command
line users.
[Sysname] domain system
[Sysname-isp-system] authorization command hwtacacs-scheme hw
authorization default
Syntax
authorization default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
] |
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
undo authorization default
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name
: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local
: Performs local authorization.
none
: Does not perform any authorization. In this case, an authenticated user is automatically
authorized with the corresponding default rights.
radius-scheme radius-scheme-name
: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the
authorization default
command to specify the authorization scheme for all types of users.
Use the
undo authorization default
command to restore the default.