3Com S7902E Command Reference Manual - page 528
1-19
network
Syntax
network network-address
[
mask-length
|
mask
mask
]
undo network
View
DHCP address pool view
Default Level
2: System level
Parameters
network-address
: IP address range for dynamic allocation. If no mask length and mask is specified, the
natural mask will be used.
mask-length
: Mask length, in the range of 1 to 30.
mask
mask
: Specifies the IP address network mask, in dotted decimal format.
Description
Use the
network
command to specify the IP address range for dynamic allocation in a DHCP address
pool.
Use the
undo network
command to remove the specified address range.
No IP address range is specified by default.
Note that you can specify only one network segment for each DHCP global address pool. If you use the
network
command repeatedly, the latest configuration will overwrite the previous one.
Related commands:
dhcp server ip-pool
,
dhcp server forbidden-ip
.
Examples
# Specify 192.168.8.0/24 as the address range for dynamic allocation in DHCP address pool 0.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] network 192.168.8.0 mask 255.255.255.0
option
Syntax
option code
{
ascii
ascii-string
|
hex
hex-string
& |
ip-address ip-address
& }
undo option
code
View
DHCP address pool view
Default Level
2: System level