- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 936
of
2327
Go
1-72
z
Timer configured using the
peer timer
command is preferred to the timer configured using this
command.
z
The holdtime interval must be at least three times the keepalive interval.
z
The configured timer applies to all the BGP peers, while it becomes valid only after the
corresponding BGP connections are reset.
Related commands:
peer timer
.
Examples
# Configure keepalive interval and holdtime interval as 60s and 180s.
[Sysname] bgp 100
[Sysname-bgp] timer keepalive 60 hold 180
# In BGP-VPN instance view, configure keepalive interval and holdtime interval as 60s and 180s (the
VPN has been created).
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] timer keepalive 60 hold 180