3Com S7902E Command Reference Manual - page 1575
1-43
Reply from 100.2.3.1: bytes=100 Sequence=3 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=4 time = 62 ms
--- FEC: LDP IPV4 PREFIX 3.3.3.9/32 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/55/62 ms
remote-ip
Syntax
remote-ip
ip-address
undo remote-ip
View
MPLS LDP remote peer view
Default Level
1: Monitor level
Parameters
ip-address
: Remote peer IP address.
Description
Use the
remote-ip
command to configure the remote peer IP address.
Use the
undo remote-ip
command to remove the configuration.
Note that the remote peer IP address must be the MPLS LSR ID of the remote peer. Two peers use their
MPLS LSR IDs as the transport addresses to establish the TCP connection.
Related commands:
mpls ldp remote-peer
.
Examples
# Configure the remote peer IP address.
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3
reset mpls ldp
Syntax
reset mpls ldp
[
all
| [
vpn-instance
vpn-instance-name
] [
fec
mask
|
peer
peer-id
] ]
View
User view