3Com S7902E Command Reference Manual - page 1998
1-7
---------------- CLIPBOARD-----------------
telnet server enable
display clock
Syntax
display clock
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display clock
command to view the current system time and date.
The current system time and date are decided by the
clock datetime
,
clock summer-time one-off
(or
clock summer-time repeating
),
clock timezone
. Refer to
Configuring the system clock
in the
operation manual for the detailed rules.
Related commands:
clock datetime
,
clock summer-time one-off
,
clock summer-time repeating
,
clock timezone
.
Examples
# Display the current time and date.
09:41:23 UTC Thu 12/15/2005
display current-configuration
Syntax
display current-configuration
[ [
configuration
[
configuration
] |
interface
[
interface-type
]
[
interface-number
] ] [
by-linenum
] [
|
{
begin
|
exclude
|
include
}
regular-expression
] ]
View
Any view
Default Level
2: System level
Parameters
configuration
[
configuration
]: Specifies to display non-interface configuration. If no parameter is used,
all the non-interface configuration is displayed; if parameters are used, display the specified information.
For example: