3Com S7902E Command Reference Manual - page 1172
1-15
display pim control-message counters
Syntax
display pim
[
all-instance
|
vpn-instance vpn-instance-name
]
control-message counters
[
message-type
{
probe
|
register
|
register-stop
} | [
interface interface-type interface-number
|
message-type
{
assert
|
bsr
|
crp
|
graft
|
graft-ack
|
hello
|
join-prune
|
state-refresh
} ] * ]
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
probe
: Displays the number of null register messages.
register
: Displays the number of register messages.
register-stop
: Displays the number of register-stop messages.
interface interface-type
interface-number
: Displays the number of PIM control messages on the
specified interface.
assert
: Displays the number of assert messages.
bsr
: Displays the number of Bootstrap messages.
crp
: Displays the number of C-RP-Adv messages.
graft
: Displays the number of Graft messages.
graft-ack
: Displays the number of Graft-ack messages.
hello
: Displays the number of Hello messages.
join-prune
: Displays the number of Join/prune messages.
state-refresh
: Displays the number of state refresh messages.
Description
Use the
display pim control-message counters
command to view the statistics information of PIM
control messages.
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.
Examples
# View the statistics information of all types of PIM control messages on all interfaces in the public
instance.
VPN-Instance: public net
PIM global control-message counters:
Received Sent Invalid