3Com S7902E Command Reference Manual - page 215
1-23
Table 1-5 display protocol-vlan interface
command output description
Field
Description
Interface
Interface of which you want to view the information
VLAN ID
ID of the protocol-based VLAN bound with the port
Protocol Index
Protocol template index
Protocol Type
Protocol type specified by the protocol template
display protocol-vlan vlan
Syntax
display protocol-vlan vlan
{
vlan
-
id1
[
to vlan
-
id2
]
| all
}
View
Any view
Default Level
2: System level
Parameters
vlan
-
id1
: ID of the protocol-based VLAN for which information is to be displayed, in the range of 1 to
4094.
vlan
-
id1 to vlan
-
id2
: Displays protocol-based VLAN information of a VLAN range from
vlan-id1
to
vlan
-
id2
. The
vlan
-
id2
argument specifies a protocol-based VLAN ID in the range of 1 to 4094, but you
must ensure that its value is greater than or equal to that of
vlan
-
id1
.
all
: Displays information about all protocol-based VLANs.
Description
Use the
display protocol-vlan vlan
command to display the protocols and protocol indexes configured
on the specified VLAN(s).
Related commands:
display vlan
.
Examples
# Display the protocols and protocol indexes configured on all protocol-based-VLANs.
VLAN ID:2
Protocol Index Protocol Type
======================================================
0 ipv4
3 ipx ethernetii
VLAN ID:3
Protocol Index Protocol Type
======================================================
0 ipv4
1 ipx snap