3Com S7902E Command Reference Manual - page 1772
2-1
2
RADIUS Configuration Commands
RADIUS Configuration Commands
data-flow-format (RADIUS scheme view)
Syntax
data-flow-format
{
data
{
byte
|
giga-byte
|
kilo-byte
|
mega-byte
}
|
packet
{
giga-packet
|
kilo-packet
|
mega-packet
|
one-packet
} } *
undo data-flow-format
{
data
|
packet
}
View
RADIUS scheme view
Default Level
2: System level
Parameters
data
: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or gigabyte.
packet
: Specifies the unit for data packets, which can be one-packet, kilo-packet, mega-packet, or
giga-packet.
Description
Use the
data-flow-format
command to specify the unit for data flows or packets to be sent to a RADIUS
server.
Use the
undo data-flow-format
command to restore the default.
By default, the unit for data flows is
byte
and that for data packets is
one-packet
.
Note that the specified unit of data flows sent to the RADIUS server must be consistent with the traffic
statistics unit of the RADIUS server. Otherwise, accounting cannot be performed correctly.
Related commands:
display radius scheme
.
Examples
# Define RADIUS scheme
radius1
to send data flows and packets destined for the RADIUS server in
kilobytes and kilo-packets.
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet