3Com S7902E Command Reference Manual - page 2191
1-18
[Sysname] info-center monitor channel 0
info-center snmp channel
Syntax
info-center snmp channel
{
channel
-
number | channel
-
name
}
undo info-center snmp channel
View
System view
Default Level
2: System level
Parameters
channel
-
number
: Specifies a channel number, in the range 0 to 9.
channel
-
name
: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the
info-center channel name
command.
Description
Use the
info-center snmp channel
command to configure the channel to output system information to
the SNMP module.
Use the
undo info-center snmp channel
command to restore the default channel to output system
information to the SNMP module.
By default, output of system information to the SNMP module is enabled with a default channel name of
snmpagent and a default channel number of 5.
For more information, refer to the
display snmp-agent
command in the
SNMP Commands
in the
System Volume
.
Examples
# Set to output system information to the SNMP module through channel 6.
[Sysname] info-center snmp channel 6
info-center source
Syntax
info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number | channel
-
name
} [
debug
{
level
severity
|
state
state
} * |
log
{
level
severity
|
state
state
} * |
trap
{
level
severity
|
state
state
}
* ] *
undo info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number | channel
-
name
}
View
System view