3Com S7902E Command Reference Manual - page 1694
2-12
Related commands:
qos policy
,
traffic behavior
,
classifier behavior
.
Examples
# Configure the action of setting the customer network VLAN ID to 2 for a traffic behavior.
[Sysname] traffic behavior database
[Sysname-behavior-database] remark customer-vlan-id 2
remark dot1p
Syntax
remark dot1p
8021p
undo remark dot1p
View
Traffic behavior view
Default Level
2: System Level
Parameters
8021p
: 802.1p precedence to be set for packets, in the range 0 to 7.
Description
Use the
remark dot1p
command to configure the action of setting 802.1p precedence for a traffic
behavior.
Use the
undo remark dot1p
command to remove the action of setting 802.1p precedence
Note that, when the
remark dot1p
command is used together with the
remark local-precedence
command, the 802.1p precedence to be set for packets must be the same as the local precedence to be
set for packets. Otherwise, the corresponding policy cannot be applied successfully.
Related commands:
qos policy
,
traffic behavior
,
classifier behavior
.
Examples
# Configure the action to set 802.1p precedence to 2 for a traffic behavior.
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2
remark drop-precedence
Syntax
remark drop-precedence
drop-precedence-value
undo remark drop-precedence
View
Traffic behavior view