3Com S7902E Command Reference Manual - page 2025
1-11
Description
Use the
display memory
command to display the usage of the memory of all or specified boards of a
device.
Examples
# Display the usage of the memory of a device.
System Total Memory(bytes): 395165344
Total Used Memory(bytes): 80815056
Used Rate: 20%
Table 1-3 display memory
command output description
Field
Description
System Total Memory(bytes)
Total size of the system memory (in bytes)
Total Used Memory(bytes)
Size of the memory used (in bytes)
Used Rate
Percentage of the memory used to the total memory
display power
Syntax
display power
[
power
-
id
]
View
Any view
Default Level
1: Monitor level
Parameters
power
-
id
: Displays the status of the specified power supply unit, where
power
-
id
represents the power
supply unit number. The value varies with devices.
Description
Use the
display power
to display the status of the power supply of a device.
Examples
# Display the status of the power supply of a device (The displayed information varies with devices).
Power 1 State: Absent
Power 2 State: Normal
The above information indicates that power supply 2 works normally, and power supply 1 and power
supply 3 are absent.