3Com S7902E Command Reference Manual - page 1723
4-5
LPU type
Description on discard-probability discard-prob
SC
Reciprocal of the drop probability. The argument corresponds to the drop
probability as follows:
z
0 corresponds to 100%
z
1 through 8 corresponds to 1/8
z
9 through 16 corresponds to 1/16
z
17 through 32 corresponds to 1/32
z
33 through 64 corresponds to 1/64
z
65 through 90 corresponds to 1/128
Description
Use the
queue
command to configure the drop-related parameters for a specified queue in the WRED
table.
Use the
undo queue
command to restore the default.
By default, the lower threshold is 10 and the
discard-prob
argument is 10 for all the drop levels in the
WRED table.
Related commands:
qos wred queue table
.
Examples
# Modify drop parameters for queue 1 in the WRED table
queue-table1
: set the lower threshold to 10
and the degree of the included angle between the drop probability and queue length percentage to 30
for packets with drop level 1 in queue 1 (assuming the WRED table
queue-table1
is applied to a port on
an EA LPU).
[Sysname] qos wred queue table queue-table1
[Sysname-wred-table-queue-table1] queue 1 drop-level 1 low-limit 10 discard-probability 30