3Com S7902E Command Reference Manual - page 1396
1-25
Description
Use the
hello-option neighbor-tracking
command to globally disable join suppression, namely enable
neighbor tracking.
Use the
undo hello-option neighbor-tracking
command to enable join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
Related commands:
pim ipv6 hello-option neighbor-tracking
.
Examples
# Disable join suppression globally.
[Sysname] pim ipv6
[Sysname-pim6] hello-option neighbor-tracking
hello-option override-interval (IPv6 PIM view)
Syntax
hello-option override-interval
interval
undo hello-option override-interval
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval
: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the
hello-option override-interval
command to configure the global value of the prune override
interval.
Use the
undo hello-option override-interval
command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
Related commands:
hello-option lan-delay
,
pim ipv6 hello-option lan-delay
,
pim ipv6 hello-option
override-interval
.
Examples
# Set the prune override interval to 2,000 milliseconds globally.
[Sysname] pim ipv6
[Sysname-pim6] hello-option override-interval 2000