3Com S7902E Command Reference Manual - page 1162
1-5
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
group-address
: Multicast group address, in the range of 239.0.0.0 to 239.255.255.255.
mask
: Mask of the multicast group address.
mask-length
: Mask length of the multicast group address, in the range of 8 to 32.
hash-length
: Hash mask length in the admin-scope region corresponding to the specified multicast
group, in the range of 0 to 32. If you do not include this argument in your command, the corresponding
global setting will be used.
priority
: Priority of the C-BSR in the admin-scope region corresponding to a multicast group, in the
range of 0 to 255. If you do not include this argument in your command, the corresponding global setting
will be used. A larger value of this argument means a higher priority.
Description
Use the
c-bsr group
command to configure a C-BSR for the admin-scope region associated with the
specified group.
Use the
undo c-bsr
group
command to remove the C-BSR configuration for the admin-scope region
associated with the specified group.
By default, no C-BSRs are configured for admin-scope regions.
Related commands:
c-bsr global
,
c-bsr admin-scope
,
c-bsr hash-length
,
c-bsr priority
.
Examples
# In the public instance configure the router to be a C-BSR in the admin-scope region associated with
the multicast group address 239.0.0.0/8, with the priority of 10.
[Sysname] pim
[Sysname-pim] c-bsr group 239.0.0.0 255.0.0.0 priority 10
c-bsr hash-length (PIM view)
Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level